Thus, tells your operating system: “I am a device made by Super Top, model number 1212.”
So, the USB Device ID VID_14CD_PID_1212 refers to a specific Wacom device.
If your brand new card reader (VID 14CD, PID 1212) isn't showing up, it might be a conflict with USB Attached Storage (UAS). Add a quirk to disable UAS for this specific ID.
Some users encounter disconnects. In Device Manager , right-click the device, go to Properties > Power Management , and uncheck "Allow the computer to turn off this device to save power" . usb device id vid 14cd pid 1212
Initial hardware enumeration reveals the following technical specifications:
This chipset is limited to and lacks advanced features like TRIM or UASP. If your device is:
Users have reported varying speeds for this device based on the specific microSD card used. Typical performance data from the NirSoft USB Speed Test database includes: Generally ranges between 10 MB/s and 21 MB/s . Write Speeds: Generally ranges between 3 MB/s and 14 MB/s . Power Consumption: Typically low, around 100mA . Driver & Troubleshooting Guide Thus, tells your operating system: “I am a
| Issue Category | Specific Problem | Reported By/Source | | :--- | :--- | :--- | | | Data written to the SD card becomes unreadable, damaged, or lost. | Linux Kernel Mailing List (LKML) | | USB Resets | The device constantly disconnects and reconnects ("resets"), making the drive letter appear and disappear. | LKML, Windows 10 Forums | | Compatibility | Issues occur predominantly with USB 3.0 (xHCI) controllers; works better on older USB 2.0 (EHCI) ports. | LKML | | Write Sensitivity | The problems (resets/corruption) almost always occur during WRITE operations. Read-only access may work fine. | LKML |
Troubleshooting and Identifying USB Device ID VID 14CD PID 1212 (Super Top)
Before we address the specific number, let’s break down the notation: Some users encounter disconnects
The device is widely used, but many users report a range of issues from data corruption to boot failures.
You must force the kernel to use the legacy, more stable usb-storage driver instead of UAS. Open your terminal.