Systec It3 User Manual -
The IT3's software is designed for intuitive operation and powerful functionality. It features a clear plain-text operator prompting system in multiple languages, configurable to guide users through weighing tasks. The standard software includes various applications for tasks such as weight display and printing (BASIC), setpoint monitoring with 2 setpoints (BASIC), parts counting (COUNT) with reference weight memories, vehicle weighing (TRUCK) for truck scales, and simple filling tasks (FILL). Configuration and customisation can be performed via the integrated web server or the IT CONFIGURATOR software.
Define the step increment (e.g., 0.1 kg, 0.5 kg).
The manual provides a comprehensive troubleshooting guide to handle common issues.
The Systec IT3 is equipped with multiple redundant safety systems. The user manual devotes a full chapter to explaining each one: systec it3 user manual
This comprehensive guide serves as an operational blueprint, detailing hardware setup, calibration procedures, software modes, and troubleshooting steps typically found in the technical reference files. 1. Hardware Overview and Technical Specifications
The factory firmware within the SysTec IT3 supports several pre-installed operational modes. Users can select these profiles depending on factory layout requirements: Operating Mode Core Functionality Data Archive Support
The is a universal, Weights & Measures (W&M) approved industrial weighing terminal engineered for demanding process environments. Protected by a rugged IP69K stainless steel housing , this controller is a staple in the chemical, pharmaceutical, and food processing industries. The IT3's software is designed for intuitive operation
Ensure the scale platter or hopper is empty. Execute the zero-calibration command. The terminal stores this sensor voltage as the baseline.
Calibration data and settings can be transferred to a PC for backup using the SIM-NET module. Summary of Technical Data Specification Housing Stainless Steel IP69K Display 5" Color, Backlit Load Cells Max. 8 x 350 Ω (analog) Resolution Up to 10,000 d Interfaces Serial (RS232/RS485), Ethernet, USB (optional)
This comprehensive manual covers technical specifications, operating modes, step-by-step installation, calibration procedures, and troubleshooting guidelines. Technical Specifications Overview Configuration and customisation can be performed via the
| Error Code / Symptom | Probable Cause | Solution | | :--- | :--- | :--- | | | A/D converter overload | Check load cell wiring for short circuits. Reduce load on scale. | | Display shows "Err 2" | Signal too low / Broken wire | Check continuity of load cell cable (SIG+/SIG-). | | Unstable Readings | Electrical noise / Vibration | Check grounding (shielding). Increase digital filter depth. | | No Communication | Wrong Baud rate / Cable issue | Verify RS-232/485 cable connection (pinout crossover). Check baud rate settings. |
In its baseline state, the IT3 displays the current weight from the connected scale.
The manual warns against setting temperatures above 121°C for open liquid containers, as violent boiling will occur during exhaust.