Mks Laser Tool Setup V1.1.2.exe Download Updated Jun 2026

Ensure you are using the correct firmware file ( .bin ) that matches your specific machine version.

A: This usually points to a communication issue. The most common causes are:

By default, the IP address of the machine might change over time. To prevent this, you can set up an IP reservation for the machine in your router's settings.

MKS Laser Tool Setup V1.1.2.exe: A Complete Guide to Downloading and Installing Mks Laser Tool Setup V1.1.2.exe Download

Set the (typically 115200 or 921600 for ESP32 boards). Click Browse and select your downloaded .bin firmware file.

Find the file named Mks Laser Tool Setup V1.1.2.exe and download it to your local machine.

Once the application opens, you will be greeted by a simple grid menu offering four main toolsets: , MKS ESP32 Download Tool , WiFi Configuration Tool , and Data Transfer . 1. Flashing Firmware (MKS ESP32 Download Tool) Ensure you are using the correct firmware file (

: A wireless utility allowing users to link their laser engraver to a local area network (LAN) to enable mobile control via the MKSLaser Mobile App . Step-by-Step Installation Guide

Find the "MKS-DLC32" or "MKS-Laser-Tool" repository.

: Convert images and NC files specifically optimized for MKS hardware. Plug-and-Play : Simple USB interface detection for quick setup. Download & Installation To prevent this, you can set up an

Check your USB cable connection. Ensure the machine is fully powered on. Reinstall the CH340 driver and restart your PC. Try a different USB port (preferably a USB 2.0 port directly on the motherboard). 2. Software Freezes During Firmware Flash

While version 1.1.2 was a standard release, newer versions (like

"Mks Laser Tool Setup V1.1.2.exe" an older version of the configuration and firmware flashing software for Makerbase (MKS) laser engraving motherboards, such as the