“CAUTION: Moving parts. Risk of pinching.” “WARNING: Optical clot detection. Do not use hemolyzed or lipemic samples without centrifugation at 3,000 G for 15 minutes.”
Keep a printed copy near the instrument inside a clear plastic sleeve, but also store a PDF on a lab-dedicated computer for quick keyword searches (e.g., “Ctrl+F” for “APTT calibration”).
To effectively use the START 4, you must know where to find specific information within the manual. The document is typically divided into several logical sections: diagnostica stago start 4 coagulation analyzer manual
: Cleaning working surfaces and measurement wells with a 1:10 dilution of 5% sodium hypochlorite followed by a distilled water rinse. System Checks
Comprehensive Guide to the Diagnostica Stago Start 4 Coagulation Analyzer “CAUTION: Moving parts
The analyzer requires a warm-up period to reach 37°C. The "Temp" indicator will stabilize when ready. 2. Preparing Consumables Cuvettes: Use only Stago-certified cuvettes.
A: Yes, the STart 4 is capable of performing not only clotting tests but also chromogenic and immunoassay (microlatex) methods . To effectively use the START 4, you must
The manual offered a solution: “Dilute sample 1:2 in saline. Multiply result by 2. Verify with mechanical clot detection if available.”
Select the desired test parameter using the keypad.
Even decades after its release, it is prized for several "manual" charms: The "Indestructible" Reputation
Monitored in seconds, % activity, or INR. Used for extrinsic pathway screening and oral anticoagulant therapy (Warfarin) monitoring.