Enter the receive frequency of the repeater or simplex channel.
The IC-2200H uses its front-panel or OPC-478UC cloning cable interface. OPC-478 (Serial): Connects to an older RS-232 serial port.
Right-click the Windows Start button and open . Expand the Ports (COM & LPT) section.
Older counter-feit or legacy programming cables use prolific chips that lack official support on newer Windows versions. If you see a yellow exclamation mark in Device Manager, you may need to roll back to an older, legacy driver version or purchase an updated, authorized Icom cable. Alternative Software Options CS-2200 Icom IC-2200H Programming Software
Will require running the installer and the executable in Compatibility Mode (set to Windows 7 or XP Service Pack 3). You must also run the application as an Administrator.
The reduces that time to under five minutes. Beyond speed, it offers:
For the dedicated operator, CS-2200 is the bridge between a good radio and a great operating experience. Enter the receive frequency of the repeater or
It includes a spreadsheet-style layout with point-and-click options. It also features built-in links to online repeater directories, allowing you to automatically populate frequencies based on your location.
This is the official Icom USB cloning cable. It connects to your PC’s USB port and plugs into the speaker (SP) jack on the back of the IC-2200H.
Program repeater shifts (offset direction and frequency), access tones, repeater tone settings, and split-frequency duplex operations with a few clicks. No more complex button sequences on the radio. Right-click the Windows Start button and open
The CS-2200 is a programming software for the Icom IC-2200H, a popular amateur radio transceiver. The software allows users to program and manage the radio's settings, frequencies, and features using a computer.
This is where the becomes an essential tool. This software transforms the task of managing your radio's memory from a chore into a seamless, efficient process. What is CS-2200 Programming Software?
Manually programming the IC-2200H via the microphone or front keys is possible, but it is painfully slow. Entering a single repeater with a tone shift and CTCSS code can take over a minute. For 200 channels, that is over three hours of non-stop work.